1969 FIREBIRD STACKED GAUGES SETUP
This will be HUGE!!!!
This is the Pontiac Option U30 Stacked Gauge setup. It allows a Tachometer on the left, and Speedometer on the right, and places the Oil, Fuel, and Temperature Gauges in the rectangular port to the right of the Speedometer that either has the Pontiac arrow, or the factory clock. This is a very rare option and every effort has been made to replicate it as close to original as possible.
UPDATE: We will now have Three different options for this setup.
(1) No main gauge housing included. You would use your own housing with VERY little (drill a hole for a ground, and cover two original idiot light holes). Also, No Speedometer gauge face or light diverters that sit in back of the speedometer for your turn signals, brights, and brake light. $800
(2) Complete with new main housing, as well as new Speedometer face. Simply take your speedometer guts and install them in the new housing. This option is best for those with a discolored speedometer face or those with no instrument cluster at all. $900
(3) NEW STEPPER MOTOR TECHNOLOGY, Complete with new main housing, as well as new Speedometer face. This BRAND NEW design gives you modern technology while maintaining your original appearance.
This also gives the added bonus of a hidden warning light system. This will turn the background red if temp rises above 220, Oil pressure drops to 5 pound, or fuel drops below 1/8 tank. It will also rapid flash red if temp rises above 240, oil drops to 2 pounds, or fuel is 1/16 tank or less.
It will self test at every start and also has a blue led that will illuminate until water temp rises to 100 degrees.
Simply take your speedometer guts and install them in the new housing. This option is best for those with a discolored speedometer face or those with no instrument cluster at all. $900
See attached videos for the develpment of this technology for us.
Both options will have a new Tachometer, as well as new Temperature, Oil pressure, and Fuel gauge, as well as new "GEN" lens.
It has the printed circuit wiring in the back, modified to accept the standard, no gauge, housing and wiring harness.
If your car had the factory rally gauges (Fuel, Oil pressure, and Temperature gauges and Gen light) two wires will need to be swapped in your pigtail that plugs into this unit.
We are also in development for two more options. (1) a clock instead of tachometer for those people that have, and like their hood tach. and (2) an Amp gauge, ( or voltage gauge) to replace the "GEN" light in the tachometer face.
This is still a few months out, but we are working on it.
The stepper motor technology is a result of our vision, and Electronics Unmessed immense knowledge, and understanding of our goal. Without their help this vision would not have become a reality.
We are DEEPLY greatful for their expertise, guidance, and vision beyond what we even had. they are more than happy to take any suggestions, and/or contributions to continue their work to improve life in every aspect. They are doing FAR more than just our project. Please visit, and support their youtube channel and leave comments on anything you see that intrigues you.
$800.00 Without center dash housing and Speedometer face.
$900.00 Complete with new housing, speedometer face, and more.
$900.00 Complete with new housing, speedometer face, with new stepper motor technology
